快乐十分选5中3有钱吗

AC Drive China Forum
Forum » Energy Saving Solutions » Understand the capability of system using VFD, Scada and PLC
Topics: Understand the capability of system using VFD, Scada and PLC on Energy Saving Solutions
#1
Start by
ASAF KAJA HUSSAIN
01-03-2014 02:55 AM

Understand the capability of system using VFD, Scada and PLC

Hi friends, hope you all doing well i am going to build  prototype to show the common people to understand the capability of system using VFD, Scada and PLC, so i'm seeking valuable suggestion from you guys, so please comment
what would be the simple and best prototype that i should make to show the full capability of automation systems.
01-03-2014 05:12 AM
Top #2
Aris Radaza
01-03-2014 05:12 AM
Try building a project that focuses on Energy Savings, and also on Safety. One example is the control of two or more water pumps via HMI/SCADA that supplies the water needs of a community. to control its speed and torque effectively, which will also mean that you are efficiently using power. Motor status alarms, and other events maybe viewed in HMIs to prompt operators the conditions of the motors. You can also set schedules to which pumps will run and to up to when it will run. You can create a lot of options from here.

Hope that this helps.

Cheers,
Aris
01-03-2014 08:08 AM
Top #3
ASAF KAJA HUSSAIN
01-03-2014 08:08 AM
Thank you aris
01-03-2014 10:22 AM
Top #4
Ferdy Santoso
01-03-2014 10:22 AM
Hi Asaf, I think you can make a power station prototype, you can use VFD to control the primemover and frequency output generator. But maybe you have to make a great page for generator dan primemover view in SCADA.
01-03-2014 01:18 PM
Top #5
Ferdy Santoso
01-03-2014 01:18 PM
I mean you can control speed of the primemover to influence the frequency output generator.
01-03-2014 03:49 PM
Top #6
Faisal K. Iwala
01-03-2014 03:49 PM
Hi Asaf,

You can not call this a SCADA that is a PLC controllering a motor with VFD and displaying status on HMI. SCADA is much more big and complex system.

You can call it as a RMS - remote monitoring system. Do not confuse yourself and other learners about SCADA.
01-03-2014 06:18 PM
Top #7
ASAF KAJA HUSSAIN
01-03-2014 06:18 PM
Thanks for your comment fredy
01-03-2014 08:28 PM
Top #8
ASAF KAJA HUSSAIN
01-03-2014 08:28 PM
you are right faizal i knew about that , i have a doubt is there be any difference between SCADA & SCMS systems
01-03-2014 11:08 PM
Top #9
Próspero Vieira
01-03-2014 11:08 PM
Maybe, a project with a simple program on a common low profile PLC such as OMRON CP1M or a SiemensS7-200 using a SCADA or HMI support such OPC services to comunicate with a Visual Basic application.
01-04-2014 01:35 AM
Top #10
ASAF KAJA HUSSAIN
01-04-2014 01:35 AM
thank u prosper
01-04-2014 03:37 AM
Top #11
Atif Ali
01-04-2014 03:37 AM
it is water treatment system, two/three filters usually observed at home, addition is a small .5 KW VFD ,weintec 4 inch touch HMI, fatek/ cheap PLC + Wincc Scada siemens/ Cimplicity of GE of Adnentec, cheaper little membranes + pump is 1st step, + VFD in 2nd step, + PLC in 3rd + HMI in 4th, + Scada/ multi HMIs at the end, do it step by step and make people happy with fresh pure water, rate may be """2 to 5 ltr per minute"""
advantage of this is that step by step u can add more instrumentation eg RAW LL auto off, Product HL auto on++++,,,,,,,,,,,,,,,,loved or simple way of question
Reply to Thread
怎么举报网络彩票 手机竞彩足球在哪里买 手机棋牌输了几百万 快乐棋牌游戏 我爱彩票邀请码是多少 怎么购买手机赌博软件 手机棋牌输钱追回 怎么下载波克棋牌 我要看福建体彩三十一选七走势图 怎么样进入赌单双软件